CPU |
1. LGA1700 socket: Support for 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors* |
2. L3 cache varies with CPU | |
* Please refer to “CPU Support List” for more information. | |
Chipset |
1. Intel® B660 Express Chipset |
Memory |
1. Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/DDR4 5000(O.C.)/4933(O.C.)/4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200/3000/2933/2666/2400/2133 MHz memory modules |
2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
3. Dual channel memory architecture | |
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
6. Support for Extreme Memory Profile (XMP) memory modules | |
(Please refer “Memory Support List” for more information.) | |
Onboard Graphics |
Integrated Graphics Processor-Intel® HD Graphics support: |
1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz | |
2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz | |
* Support for HDMI 2.1 version and HDCP 2.3. | |
** Support native HDMI 2.1 TMDS compatible ports. | |
3. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz | |
* Support for DisplayPort 1.2 version and HDCP 2.3 | |
4. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz | |
* Support for DisplayPort 1.2 version. | |
(Graphics specifications may vary depending on CPU support.) | |
Support for up to 4 displays at the same time | |
Audio |
1. Realtek® Audio CODEC |
2. High Definition Audio | |
3. 2/4/5.1/7.1-channel | |
4. Support for S/PDIF Out | |
LAN |
1. Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
Expansion Slots |
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
(The PCIEX16 slot conforms to PCI Express 4.0 standard.) | |
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) | |
3. 1 x PCI Express x1 slot | |
(The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.) | |
4. 1 x PCI slot | |
Multi-Graphics Technology |
1. Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
Storage Interface |
CPU: |
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) | |
Chipset: | |
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB) | |
2. 4 x SATA 6Gb/s connectors | |
Support for RAID 0, RAID 1, RAID 5, and RAID 10 | |
Intel® Optane™ Memory Ready | |
* System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connector supported by the Chipset. | |
USB |
Chipset: |
1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support | |
2. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel | |
3. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header) | |
4. 2 x USB 2.0/1.1 ports on the back panel | |
Chipset+2 USB 2.0 Hubs: | |
1. 4 x USB 2.0/1.1 ports available through the internal USB headers | |
Internal I/O Connectors |
1. 1 x 24-pin ATX main power connector |
2. 1 x 8-pin ATX 12V power connector | |
3. 1 x CPU fan header | |
4. 3 x system fan headers | |
5. 1 x addressable LED strip header | |
6. 1 x RGB LED strip header | |
7. 2 x M.2 Socket 3 connectors | |
8. 4 x SATA 6Gb/s connectors | |
9. 1 x front panel header | |
10. 1 x front panel audio header | |
11. 1 x USB 3.2 Gen 1 header | |
12. 2 x USB 2.0/1.1 headers | |
13. 1 x S/PDIF Out header | |
14. 2 x Thunderbolt™ add-in card connectors | |
15. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) | |
16. 1 x serial port header | |
17. 1 x parallel port header | |
18. 1 x reset button | |
19. 1 x Q-Flash Plus button | |
20. 1 x reset jumper | |
21. 1 x Clear CMOS jumper | |
*All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W. | |
Back Panel Connectors |
1. 1 x PS/2 keyboard/mouse port |
2. 1 x USB Type-C® port, with USB 3.2 Gen 2 support | |
3. 1 x USB 3.2 Gen 2 Type-A port (red) | |
4. 2 x USB 3.2 Gen 1 ports | |
5. 2 x USB 2.0/1.1 ports | |
6. 1 x D-Sub port | |
7. 1 x HDMI port | |
8. 2 x DisplayPorts | |
9. 1 x RJ-45 port | |
10. 6 x audio jacks | |
I/O Controller |
1. iTE® I/O Controller Chip |
H/W Monitoring |
1. Voltage detection |
2. Temperature detection | |
3. Fan speed detection | |
4. Fan fail warning | |
5. Fan speed control | |
* Whether the fan speed control function is supported will depend on the cooler you install. | |
BIOS |
1. 1 x 256 Mbit flash |
2. Use of licensed AMI UEFI BIOS | |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features |
1. Support for APP Center |
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. | |
@BIOS | |
EasyTune | |
Fast Boot | |
Game Boost | |
ON/OFF Charge | |
RGB Fusion | |
Smart Backup | |
System Information Viewer | |
2. Support for Q-Flash Plus | |
3. Support for Q-Flash | |
4. Support for Xpress Install | |
Bundled Software |
1. Norton® Internet Security (OEM version) |
2. cFosSpeed | |
Operating System |
1. Support for Windows 11 64-bit |
2. Support for Windows 10 64-bit | |
Form Factor |
1. Micro ATX Form Factor; 24.4cm x 24.4cm |
Đánh giá
Chưa có đánh giá nào.